Dipper handle racks
We supply P&H series, CAT series, WK series Racks for excavator.
- Product Introduction
Racks for excavator is a key transmission component in electric shovel equipment.
It is a long strip structure with a series of equidistant teeth. From the appearance, the rack has a clear tooth profile and high dimensional accuracy. These teeth are closely matched with the gear to achieve power transmission. Its length varies according to the specific specifications and design purposes of the electric shovel. In large electric shovels, the rack is longer so that a larger range of movements can be achieved.
In terms of material, high-strength alloy steel is usually used. This material can withstand the huge pressure and frequent forces when the electric shovel is working. For example, when excavating ore in an open-pit mine, the electric shovel has to overcome the gravity and excavation resistance of the ore, and the rack for excavator needs sufficient strength to ensure that it will not be deformed or damaged.
Functionally, racks for excavator are mainly used to convert rotary motion into linear motion. When the gear that matches it rotates, the teeth are engaged with each other to drive the dipper arm or bucket of the electric shovel to extend or retract. For example, during the excavation process, the motor drives the gear to rotate, and the gear drives the rack to move linearly, thereby pushing the bucket to dig deep into the material or lift and transfer the excavated material. At the same time, it also ensures the accuracy and stability of the shovel's movement to a certain extent, because the precise tooth shape can reduce shaking and deviation during the movement.
Product hardness parameters
Alloy steel 321 HBW
High manganese steel 225 HBW
Product features and applications

Features
- High strength: The electric shovel will generate huge force during excavation, and the rack needs to bear a large load. Therefore, it is generally made of high-strength alloy steel and other materials to ensure that it will not be easily deformed or damaged under high load.
- High-precision tooth shape: The tooth shape accuracy of the rack is high, so that it can mesh well with the gear to ensure the smooth and precise movement of the electric shovel bucket and other parts. If the tooth shape accuracy is poor, it will lead to poor meshing, vibration, noise, and even affect the normal operation of the electric shovel.
- Good wear resistance: During the operation, the rack and the gear frequently mesh and rub, and are often in a harsh working environment (such as open-pit mines with more sand and ore particles), so it is necessary to have good wear resistance. Usually, heat treatment processes such as surface quenching are used to improve wear resistance.
Application
- Application in excavation action: When the electric shovel is working, the rack cooperates with the gear to transmit power to the bucket or bucket, driving them to perform excavation, lifting, rotation and other actions. For example, when digging ore, the rack drives the dipper arm through the gear drive, so that the bucket is inserted into the ore pile for digging.
- Role in equipment stability: Its stable transmission helps to maintain the balance and stability of the overall structure of the electric shovel. For example, in large-scale earthwork projects, when the electric shovel is working on soft land, the stable rack transmission can prevent the electric shovel from shaking too much due to the digging action, ensuring the safety of the operation and the digging effect.
To select suitable racks for excavator, the following aspects should be considered
Load requirements
(1) Determine the load that the required rack can withstand based on the specifications and work tasks of the electric shovel. For example, small electric shovels are used for light excavation tasks, such as small construction sites or gardening operations, and the rack load requirements are relatively low; while the electric shovels used in large open-pit mines are huge and the excavated materials are heavy, so racks that can withstand high loads are required.
(2) Consider the impact load that may occur when the electric shovel is working. For example, when excavating hard rocks, the instantaneous impact force is very large, which requires the rack to have sufficient strength reserves to cope with this situation.
Precision matching
(1) The tooth profile accuracy of the rack must match the accuracy of the matching gear. High-precision gears require equally high-precision racks to ensure good meshing. Otherwise, there will be excessive meshing clearance, resulting in vibration and noise, or excessive meshing, resulting in increased wear.
(2) For electric shovels that require precise excavation positions, such as in fine underground engineering excavation or earthwork operations near ancient building restoration projects, more attention should be paid to rack accuracy to ensure accurate movement of the dipper arm and bucket.
Wear resistance
(1) The working environment is a key factor in selecting rack wear resistance. If the electric shovel works in an open-pit mine with a lot of dust and coarse ore particles, it is necessary to select a rack with very good wear resistance, such as a rack with a hardened surface (such as high-frequency quenching).
(2) The working time and frequency of the rack should also be considered. For electric shovels that operate for a long time and at a high frequency, such as continuous operation scenarios such as loading and unloading coal at ports, the wear resistance directly affects the service life of the rack and the maintenance cost of the equipment.
Product production display


Product transportation packaging


Product after-sales service
Vavi provides comprehensive after-sales guarantee services. The product warranty period is 12 months. If there are any installation, use or quality problems during the warranty period, Vavi will provide service guidance as soon as possible.
Product Quality Assurance

Hot Tags: dipper handle racks, China dipper handle racks manufacturers, suppliers, factory, Boom, Dipper Handle, Dipper handle racks, hoist system, Lifting Roller for Excavator
You Might Also Like









